You are not logged in.

rmkk

Beginner

  • "rmkk" is male

Posts: 25

Activitypoints: 200

Date of registration: May 5th 2018

net.hawkes.userlevel.level 16 [?]

net.hawkes.userlevel.experience 9,610

net.hawkes.userlevel.nextlevel 10,000

Thanks: 8 / 1

  • Send private message

21

Thursday, May 31st 2018, 8:22am

- Proceed with setup as you please, but please do NOT install *yet* anything (channel lists, cams, etc.).


@Delfi is there any reason why shall I install flodder before the box was configured (tuner, channels, etc) ? Because this is my case, I'm using PurE2 for a month (so it is fully configured), but USB drive I bought a week ago. The problem is that flodder does not see a flashdisk partition after reboot event that ext4 partition does not report any error (fsck). I tried to consult this problem with flodder author here but with no luck.

And second question: is PurE2 image compatible with BarryAllen ? As I was told BarryAllen can work even that flodder does not.

Thanks for answer

This post has been edited 1 times, last edit by "rmkk" (May 31st 2018, 8:30am)


delfi

PurE2-Teamleiter

  • "delfi" started this thread

Posts: 855

Activitypoints: 10,335

Date of registration: Mar 14th 2013

net.hawkes.userlevel.level 40 [?]

net.hawkes.userlevel.experience 1,933,654

net.hawkes.userlevel.nextlevel 2,111,327

Thanks: 796 / 394

  • Send private message

22

Friday, June 1st 2018, 10:24am

No special reason except that there would be more flash space in rootfs. Strange about flodder and 500hd, maybe it was not forseens that an USB could be added into 500hd?
No recent experience with BA, perhaps gorski or other users can help you with this one.

delfi

PurE2-Teamleiter

  • "delfi" started this thread

Posts: 855

Activitypoints: 10,335

Date of registration: Mar 14th 2013

net.hawkes.userlevel.level 40 [?]

net.hawkes.userlevel.experience 1,933,654

net.hawkes.userlevel.nextlevel 2,111,327

Thanks: 796 / 394

  • Send private message

23

Wednesday, June 27th 2018, 5:37pm

As there were some concerns that we neglected some older DMM boxes with updates, herewith comes a **possible** solution. Please do note that we had to do a special image for 800se and 500HD, so a bit hard to maintain all that stuff.

This one is tricky and ***untested***, so up to you whether to check it out.

- unzip the attached file and FTP/copy to /etc/opkg
- from telnet : 'opkg update' and 'opkg upgrade' OR just restart and try simple SW update.

This **might** work only for users with flash expander, flodder or some other kind of multiboot that enlarges 64MB flash via USB or some other media. Please do NOT use if your PurE2 image is in Flash only.
delfi has attached the following file:

1 registered user thanked already.

Users who thanked for this post:

satelittv (01.07.2018)

delfi

PurE2-Teamleiter

  • "delfi" started this thread

Posts: 855

Activitypoints: 10,335

Date of registration: Mar 14th 2013

net.hawkes.userlevel.level 40 [?]

net.hawkes.userlevel.experience 1,933,654

net.hawkes.userlevel.nextlevel 2,111,327

Thanks: 796 / 394

  • Send private message

24

Sunday, July 1st 2018, 7:21pm

800se alternate feeds (the above script enables them) updated with latest PurE2 plgins, E2 etc.

1 registered user thanked already.

Users who thanked for this post:

satelittv (01.07.2018)

gorski

PurE2-Supporter

  • "gorski" is male

Posts: 347

Activitypoints: 3,855

Date of registration: Aug 12th 2017

net.hawkes.userlevel.level 29 [?]

net.hawkes.userlevel.experience 225,462

net.hawkes.userlevel.nextlevel 242,754

Thanks: 250 / 132

  • Send private message

25

Thursday, January 10th 2019, 3:46am

OK, so I went into cleansing Delfi's instructions, plus adding mine for Flash Expander and some other explanations, mainly for newbies...

These old machines have seriously well written drivers (low level programming) and semi-decent HW - well, for their time they were great - but even then 64MB flash was really stingy... However, they still have a great quality image, decryption works fine, I tested streaming and playback and they are also fine etc.

Given the small, tiny flash, enter Flodder, OpenMultiBoot and Flash Expander! (A few others, too - but these are noteworthy...) Small Flash suddenly becomes much bigger and these old ladies can still dance nicely! :)

Flodder works on original boxes only - although one version did not have the protection, allegedly (if anyone can find it...) - so beware!

It moves the root ( / ) to a USB stick (all the folders and files, so one uses the stick as Flash.

OpenMultiBoot is installed as a plugin, from which you can install multiple images in a USB stick and it functions well now!

Flash Expander "expands" flash to a USB stick but only some folders...

Delfi of PurE2 went into it "a bit" and got us a little bit happier, I think... or at least less miserable... :cool1:

Here is his text, edited by yours truly...;)

Quoted

Well, it has been some time since the last release, but the old loves die hard (or something like that)...

What is new?

- Latest PurE2 stuff in the feeds
- Up-to-date-Enigma2 and plugins, including all the Pure2 plugins (like OLM-fnc, Streamlord-fnc, Filme-fnc, Radio-fnc, Wazzup-fnc etc...)
- Latest version of Estuary skin
- Some effort was made towards making the basic image smaller (there is room for further improvement - but, as the reasonable way is to use some sort of extending the flash, not really in the focus)
- etc...

How to:

- Get your PurE2 images here: http://pur-e2.club/OU/images/index.php?dir=6.2/dreambox/

- Unzip the latest PurE2 image and flash with DMM web interface from SSL (it means "usual flashing method, using your browser, like Firefox")

- From here, there are a few paths to enlarge your Flash which could work for you.

- Whichever one you choose, it is wise to do exactly as described here, before installing any other stuff in the image.

- Try to use the fastest external media you can afford. The difference between an old/slow USB stick and a new/fast one can be dramatic.

There are 3 reasonable ways to use this image:

1) Install Flodder => and then the rest of the stuff... (check out the details in the post that will follow this one but in short...)

a) insert USB memory stick (formatted in EXT4) into your box, MENU > pManager > Scripts > User scripts > Start script > DoFlodder.sh script > Only once!

b) after it finishes all the deeds, you'll have plenty of space to play with - as big as your USB stick/SSD...

c) install the missing stuff (since it was necessary to reduce PurE2 image for these boxes) by doing this...

pManager > Scripts > User scripts > Start script > InstallRest.sh script > Only once > reboot (recommended way for a start)

d) SWAP is automatically created


Once it reboots you can go on messing about to your heart's content, with a peace of mind you will never run out of space installing plugins, skins, tools, picons, EPG and whatnot...

(...to be continued...)
http://www.english.upenn.edu/~mgamer/Etexts/kant.html - I. Kant, "Political writings" (1784), the jolly text on Enlightenment, at the basis of Modernity...

gorski

PurE2-Supporter

  • "gorski" is male

Posts: 347

Activitypoints: 3,855

Date of registration: Aug 12th 2017

net.hawkes.userlevel.level 29 [?]

net.hawkes.userlevel.experience 225,462

net.hawkes.userlevel.nextlevel 242,754

Thanks: 250 / 132

  • Send private message

26

Thursday, January 10th 2019, 3:52am

Delfi's text, edited by me, here and there...

Quoted

Flodder DM800HD SE PurE2 "How-to..."

I hope this helps a bit. It works rather nicely on my box.

Requirements:

USB stick or SSD

- It is wise to avoid old=slow USB sticks, new USB 3.0 stick from reliable sources seem to be fast even when running on USB 2.0 port
- It is unlikely that you would want to invest in an SSD for an old STB, but if you have an old one laying around, might be an interesting choice
- In either case, media should be formatted in Linux EXT4 partition (try to use another STB box or live Linux distribution, Windows EXT4 tools may or may not provide desired results [tools like Mini Tool Partition Wizard Free are OK, though...])

Procedure:

- Flash the latest DMM 800se (500hd if it has retrofitted USB ports) - see above for link to latest PurE2 images...
- When in Start Wizard, please *do* choose to delete other languages to save space!
- Proceed with setup as you please, but please do NOT install anything (channel lists, cams, etc.) *yet*!!!
- When done with the wizard, there are two ways to proceed:

1) Menu > open pManager > go to script > choose User script > Start script > select DoFlodder.sh > run once > "yes"

- The box will reboot and take some time to prepare USB stick.
- NOTE: the script is dumb and assumes that USB or SSD is mounted on /media/hdd

or

2) telnet to the STB, root, pure2
- type "opkg update"
- type "opkg install flodder-boottool"
- type "mkdir /media/hdd/flodder" or "mkdir /media/usb/flodder" or wherever is your desired device
- type "reboot" to migrate to external media, wait...

After that is successfully done install some missing stuff, either of the 2 following ways:

1) Menu > pManager > Script > User script > Start script > InstallRest.sh > Only run once > "yes"

- Wait, it could take some time, really long time if your media is slow
- reboot

or

2) telnet to the STB, root, pure2

- type "opkg update"
- type "opkg install ca-certificates ffmpeg rsync "
- install whatever you may need like ch lists, extra-feed, plugins
- type "sync; sync"
- reboot

Notes:

- We use slightly modified DMM kernel but OpenMultiBoot works fine for these boxes now.

- Script InstallRest.sh installs a feed for some extra stuff like dFlash


(...to be continued...)
http://www.english.upenn.edu/~mgamer/Etexts/kant.html - I. Kant, "Political writings" (1784), the jolly text on Enlightenment, at the basis of Modernity...

gorski

PurE2-Supporter

  • "gorski" is male

Posts: 347

Activitypoints: 3,855

Date of registration: Aug 12th 2017

net.hawkes.userlevel.level 29 [?]

net.hawkes.userlevel.experience 225,462

net.hawkes.userlevel.nextlevel 242,754

Thanks: 250 / 132

  • Send private message

27

Thursday, January 10th 2019, 3:42pm

2) OpenMultiBoot

Quoted

2) OpenMultiBoot (OMB) - In PurE2 "feeds" (= Plugins) this is in Extensions (enigma2-plugin-extensions-openmultiboot) > this is a new one from last release (we have put some effort to make it work :) )

a) Install enigma2-plugin-extensions-openmultiboot

b) restart PurE2, FTP your PurE2 image with 'zip' suffix to /media/hdd/open-multiboot-upload (do not unpack it!)

c) from OpenMultiBoot menu (in plugins) install PurE2 image

d) reboot, chose non-flash PurE2 image from the menu, after it finishes all the deeds, you'll have image with plenty of space on a USB or other media and you will be able to install bunch of stuff.

e) a quick and safe shortcut now is to press MENU > pManager > Scripts > User scripts > Start script > InstallRest.sh script > Only once > reboot (this is a recommended way for a start)

f) you'll have to make SWAP from pManager > Device Manager > SWAP Manager > say, 512MB SWAP


I tested this on my old 500HD with Japhar SIM card and it's brilliant!

==============================================================================================

3) These FLASH EXPANDER instructions are for a box with a USB port, using PurE2 image, of course...

gorski's 11 theses for 500HD bliss with Flash Expander

1) First thing one does is one partitions one's BIG and FAST USB 3.0 memory stick into 2 partitions (Mini Tool Partition Wizard freeware under Windows, for instance, is a good tool to do this with).

2) Then, one plugs the USB stick into one's 500HD. Old Ferrari clones have 2 USB ports: internal and external one.

3) Then, one mounts the 2 USB 3.0 stick partitions by going to:

MENU > pManager > Device Manager > Mount Manager > blue button > yellow button (to switch Automount OFF) > Exit > do this for both partitions on the USB stick.

4) Then, do not restart E2 but instead go back to mount those two partitions in a fixed manner, via FSTAB file.

How?

5) This you can do either by using the MENU or the BLUE button, then using the > or < buttons on your remote, changing the mounts to get as follows:

-smaller (say, 2GB) partition as /media/usb (= partition 1)
-bigger (say the rest, i.e. 30GB of 32GB USB stick) partition as /media/hdd (= partition 2)

6) Press OK to write it into the FSTAB file, then out of 3 options choose RESTART THE BOX. The box reboots.

(If it doesn't work the first time round, the second time it will be as you want it to be!)

7) Now, go to MENU > Plugins > Extensions > see above post and install this plugin, i.e. Flash Expander.

8) Exit and if necessary restart E2, then go back to Plugins > start Flash Expander and use it to move the /usr folder to the smaller 2GB partition (it will later on appear as /usr in various menus, as you'll see soon). Restart will follow, when it moves the /usr folder content to USB /media/usb partition.

9) I then use a SWAP Manager, which you will find in the same part of pManager, to create a SWAP file (512MB), activate it and I also make it "autostart" with E2.

This is the result, firstly showing the partitions using "df -h" command and then "before and after" SWAP creation, using "free" command:

Source code

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
PURE2-TEAM 2019

root@dm500hd:~# df -h
Filesystem                Size      Used Available Use% Mounted on
/dev/root                60.0M     56.3M      3.7M  94% /
devtmpfs                 66.3M      4.0K     66.3M   0% /dev
tmpfs                    66.4M    128.0K     66.3M   0% /var/volatile
/dev/mtdblock2            3.8M      2.7M      1.0M  73% /boot
/dev/sda2                26.9G    171.9M     25.4G   1% /media/hdd
/dev/sda1                 2.4G    179.3M      2.1G   8% /usr

root@dm500hd:~# free
total        used        free      shared  buff/cache   available
Mem:         136044       68520       10992         132       56532       42494
Swap:             0           0           0

root@dm500hd:~# free
total        used        free      shared  buff/cache   available
Mem:         136044       72472       10880         132       52692       39912
Swap:        524284           0      524284


10) Now, we can start downloading
-plugins/addons (like Franc's FNC plugins, then ffmpeg package for E2iPlayer etc. etc.)
-tools you may need (like Dream Explorer)
-skins you may want to have extra
-picons galore
-EPG
-etc. etc.

and

11) direct them all to /media/hdd (partition 2), just like we directed SWAP file to it...

Only the careful configuration of it all will ensure all will be well with our "oldie but goldie"!!! :12_small35:
http://www.english.upenn.edu/~mgamer/Etexts/kant.html - I. Kant, "Political writings" (1784), the jolly text on Enlightenment, at the basis of Modernity...

1 registered user thanked already.

Users who thanked for this post:

Eiweiss (10.01.2019)

2 users apart from you are browsing this thread:

2 guests

Similar threads