You are not logged in.

delfi

PurE2-Teamleiter

  • "delfi" started this thread

Posts: 960

Activitypoints: 11,915

Date of registration: Mar 14th 2013

net.hawkes.userlevel.level 41 [?]

net.hawkes.userlevel.experience 2,261,151

net.hawkes.userlevel.nextlevel 2,530,022

Thanks: 937 / 464

  • Send private message

21

Tuesday, January 22nd 2019, 3:06pm

SH4s updated, for 8900 MIS (Multistream) checked ok, Alien2 (amikoalien image) tuner does not support MIS, so all fine. Some PVU do not open, but most stuff is ok, even 9E. If you do use ch list with IPTV streams like from ciefp, it seems that the best results are to install plugin 'serviceapp' and choose 'exteplayer3' as the main external player. YMMD.
This stuff is really individual, no general setup could be recommended.
We did not include *enigma2-plugin-systemplugins-serviceapp* in the image by default as it pulls in a lot of stuff and some users just do not need it.
Ah yes, I think that FullHD PLi skin modded (from feeds) uses the least RAM, might be helpful, as swaps are really a killer on a slow USB.

4 registered users thanked already.

Users who thanked for this post:

pop1234 (22.01.2019), gorski (22.01.2019), terrajoe (11.04.2019), chaban (29.05.2019)

delfi

PurE2-Teamleiter

  • "delfi" started this thread

Posts: 960

Activitypoints: 11,915

Date of registration: Mar 14th 2013

net.hawkes.userlevel.level 41 [?]

net.hawkes.userlevel.experience 2,261,151

net.hawkes.userlevel.nextlevel 2,530,022

Thanks: 937 / 464

  • Send private message

22

Thursday, April 11th 2019, 12:58am

1st post updated after some time:) Besides a lot of changes to E2 code, Estuary skin, switch to new version of gstraemer 15.2xxx, latest ffmpeg 4.1.xx, FNC plugins adjusted for sh4 SoCs/architecture, etc.
Please note, the latest version of yify-fnc for sh4 is not in the feeds, but can be downloaded from HERE (yify-fnc)
Other plugins that work for SH4 are up to date.

4 registered users thanked already.

Users who thanked for this post:

gorski (11.04.2019), terrajoe (11.04.2019), pop1234 (11.04.2019), chaban (29.05.2019)

delfi

PurE2-Teamleiter

  • "delfi" started this thread

Posts: 960

Activitypoints: 11,915

Date of registration: Mar 14th 2013

net.hawkes.userlevel.level 41 [?]

net.hawkes.userlevel.experience 2,261,151

net.hawkes.userlevel.nextlevel 2,530,022

Thanks: 937 / 464

  • Send private message

23

Tuesday, May 28th 2019, 7:12am

6.3 image for amikoalien (ok alien2 and all the Fulan 7162 clones) is updated. Tested to boot ok, new ffmpeg, gstreamer, pure2 stuff, etc. Amiko 8900 (alien and spark clones) probably soon.
I do read that some complain that the image is slow compared to some bare bones stuff, but well, you can't have it all. At least, we do try to bring interesting and new stuff to sh4 :)
I hope that SWAP is not needed, but if it is, for some demanding stuff like yify-fnc etc (or you do have some enormous epg.dat), try with swapmanger2 (that '2' IS important).

The image is still too big, due to samba, but should be fixed if it works ok. If not, the project is aborted.

1 registered user thanked already.

Users who thanked for this post:

pop1234 (28.05.2019)

gorski

PurE2-Supporter

  • "gorski" is male

Posts: 413

Activitypoints: 4,695

Date of registration: Aug 12th 2017

net.hawkes.userlevel.level 31 [?]

net.hawkes.userlevel.experience 307,077

net.hawkes.userlevel.nextlevel 369,628

Thanks: 305 / 173

  • Send private message

24

Tuesday, May 28th 2019, 1:19pm

Is it possible to repartition it, so the whole flash is used by PurE2?
http://www.english.upenn.edu/~mgamer/Etexts/kant.html - I. Kant, "Political writings" (1784), the jolly text on Enlightenment, at the basis of Modernity...

delfi

PurE2-Teamleiter

  • "delfi" started this thread

Posts: 960

Activitypoints: 11,915

Date of registration: Mar 14th 2013

net.hawkes.userlevel.level 41 [?]

net.hawkes.userlevel.experience 2,261,151

net.hawkes.userlevel.nextlevel 2,530,022

Thanks: 937 / 464

  • Send private message

25

Tuesday, May 28th 2019, 1:44pm

Sure it is, but not advisable.

pop1234

Intermediate

Posts: 28

Activitypoints: 775

Date of registration: Aug 13th 2017

net.hawkes.userlevel.level 19 [?]

net.hawkes.userlevel.experience 20,809

net.hawkes.userlevel.nextlevel 22,851

Thanks: 13 / 114

  • Send private message

26

Tuesday, May 28th 2019, 2:45pm

hello @delfi
this E2 is perfect for Spark box after improvements by the team ffmpeg, gstreamer iptv and multistream
i've noticed some good comments in Arabic forums for a while
for plugin movies, you can choose only one
my personal opinion image E2 is a beautiful a long time of PBNIGMA-E2 :3_small30:
i want to see " webbrowser and hbbtv " in this box,you know my friend @delfi since when and i ask the difference Team for that
for plugin hbbtv by Franc ,if the source is opened we can see some attempts from developers to find a solution to run it on Spark (This is relevant Franc)
Golden Media Spark 7111
Fw spark / E2
:3_small30:

This post has been edited 1 times, last edit by "pop1234" (May 28th 2019, 2:45pm)


delfi

PurE2-Teamleiter

  • "delfi" started this thread

Posts: 960

Activitypoints: 11,915

Date of registration: Mar 14th 2013

net.hawkes.userlevel.level 41 [?]

net.hawkes.userlevel.experience 2,261,151

net.hawkes.userlevel.nextlevel 2,530,022

Thanks: 937 / 464

  • Send private message

27

Tuesday, May 28th 2019, 8:11pm

Thx! As per hbbtv, ah well.... we'll see.
We did try some sh4 webkits, but there were so many crashes that it was not worth the effort. On the other hand, some SH4 based MAG devices (250/254...) seem to have a working one, but it is a different system, libs, the whole enchilada.

pop1234

Intermediate

Posts: 28

Activitypoints: 775

Date of registration: Aug 13th 2017

net.hawkes.userlevel.level 19 [?]

net.hawkes.userlevel.experience 20,809

net.hawkes.userlevel.nextlevel 22,851

Thanks: 13 / 114

  • Send private message

28

Wednesday, May 29th 2019, 1:56am

Thx! As per hbbtv, ah well.... we'll see.
We did try some sh4 webkits, but there were so many crashes that it was not worth the effort. On the other hand, some SH4 based MAG devices (250/254...) seem to have a working one, but it is a different system, libs, the whole enchilada.


https://github.com/Nepose/MAG_Software_Portal

@Persianpros ,@MastaG , @Hains , @kueken (openvision team) They can help
https://github.com/OpenVisionE2/enigma2-…aa108f8ccf96101

@delfi You know them

source of VDR Plugin HbbTV old 0.0.1 and 0.1.0
It can help developers to find a solution to run it on a SH4 device

thx Pur-E2 team
pop1234 has attached the following files:
Golden Media Spark 7111
Fw spark / E2
:3_small30:

1 registered user thanked already.

Users who thanked for this post:

chaban (29.05.2019)

pop1234

Intermediate

Posts: 28

Activitypoints: 775

Date of registration: Aug 13th 2017

net.hawkes.userlevel.level 19 [?]

net.hawkes.userlevel.experience 20,809

net.hawkes.userlevel.nextlevel 22,851

Thanks: 13 / 114

  • Send private message

29

Wednesday, May 29th 2019, 4:22pm

old video ufs912 - gtk web + hbbtv by Schischu
https://www.youtube.com/watch?v=QrksBFuhh-0
old source
https://github.com/Schischu/eve-browser/…/ProjectHome.md
https://github.com/Schischu/eve-browser
This video is proof that there is a solution
Only concerted efforts should be made between developers

schischu65@gmail.com ,He is busy with android phones like our former friend graugans
Golden Media Spark 7111
Fw spark / E2
:3_small30:

pop1234

Intermediate

Posts: 28

Activitypoints: 775

Date of registration: Aug 13th 2017

net.hawkes.userlevel.level 19 [?]

net.hawkes.userlevel.experience 20,809

net.hawkes.userlevel.nextlevel 22,851

Thanks: 13 / 114

  • Send private message

30

Tuesday, July 9th 2019, 7:04pm

@delfi @Franc

check PM
Golden Media Spark 7111
Fw spark / E2
:3_small30:

1 registered user thanked already.

Users who thanked for this post:

delfi (09.07.2019)

challou

Intermediate

Posts: 44

Activitypoints: 275

Date of registration: Apr 12th 2019

net.hawkes.userlevel.level 15 [?]

net.hawkes.userlevel.experience 5,955

net.hawkes.userlevel.nextlevel 7,465

Thanks: 6 / 1

  • Send private message

31

Monday, August 12th 2019, 6:58pm

is there any fix for the iptv service 1 it downt work only service 4097 .thx

delfi

PurE2-Teamleiter

  • "delfi" started this thread

Posts: 960

Activitypoints: 11,915

Date of registration: Mar 14th 2013

net.hawkes.userlevel.level 41 [?]

net.hawkes.userlevel.experience 2,261,151

net.hawkes.userlevel.nextlevel 2,530,022

Thanks: 937 / 464

  • Send private message

32

Monday, August 12th 2019, 8:14pm

install serviceapp and try gstplayer or ffmpeg player (exte3 or something like that) ?

challou

Intermediate

Posts: 44

Activitypoints: 275

Date of registration: Apr 12th 2019

net.hawkes.userlevel.level 15 [?]

net.hawkes.userlevel.experience 5,955

net.hawkes.userlevel.nextlevel 7,465

Thanks: 6 / 1

  • Send private message

33

Monday, August 12th 2019, 9:06pm

I've tried all 3 but don't work. only service 4097 works but service 1 does not

challou

Intermediate

Posts: 44

Activitypoints: 275

Date of registration: Apr 12th 2019

net.hawkes.userlevel.level 15 [?]

net.hawkes.userlevel.experience 5,955

net.hawkes.userlevel.nextlevel 7,465

Thanks: 6 / 1

  • Send private message

34

Wednesday, August 14th 2019, 12:59am

i have only the debug log for you en som crash logs
challou has attached the following files:

rantanplan

Intermediate

Posts: 5

Activitypoints: 75

Date of registration: Feb 4th 2018

net.hawkes.userlevel.level 12 [?]

net.hawkes.userlevel.experience 2,838

net.hawkes.userlevel.nextlevel 2,912

Thanks: 6 / 3

  • Send private message

35

Sunday, August 18th 2019, 2:50pm

Würde auf Skin Fehelr tippen.
Probiere mal einen alternativen Skin.

challou

Intermediate

Posts: 44

Activitypoints: 275

Date of registration: Apr 12th 2019

net.hawkes.userlevel.level 15 [?]

net.hawkes.userlevel.experience 5,955

net.hawkes.userlevel.nextlevel 7,465

Thanks: 6 / 1

  • Send private message

36

Sunday, August 18th 2019, 4:36pm

all plugin of the movie works excellently, only iptv service 1 does not work at all ,and the service 4097 and the service 5002 keeps the image stuck and as a result I have to switch the receiver from the button behind, I also changed the skin to pli fhd and also the players, and I can't get a crash log. pure2 6.2 and pure2 6.3.thx

1 user apart from you is browsing this thread:

1 guests

Similar threads