Sie sind nicht angemeldet.

lexlexus

Anfänger

  • »lexlexus« ist männlich
  • »lexlexus« ist der Autor dieses Themas

Beiträge: 10

Aktivitätspunkte: 70

Registrierungsdatum: 29. Dezember 2018

Level: 6 [?]

Erfahrungspunkte: 185

Nächstes Level: 282

Danksagungen: 2 / 1

  • Nachricht senden

1

Sonntag, 6. Januar 2019, 21:42

ET10000 PurE2 Help Needed

Hello
Problems with PurE2 6.2 images
First off all its a fine images to work when its running .... with only it has some minor issues

for my self i cant flash it in the box but it will run in multi-boot

When i install pli 6.1 or 6.2 in flash and PurE2 in multi-boot it wont install
When i install vix 5.2 in flash and PurE2 in multi-boot it will install and run
When its running it has some issues ...
When i select applications it is searching but not with a good result ..... it only finds picons to download

oscam downloaded i manually and put it in tmp/ and than installed it and let it run

When there is a channel in the bouquet that says n/a and you select it the images crashes and will preform restart

is there a solution for all of this ...
regards

Franc

PurE2-Teamleiter

Beiträge: 225

Aktivitätspunkte: 3 330

Registrierungsdatum: 31. März 2017

Level: 27 [?]

Erfahrungspunkte: 147 531

Nächstes Level: 157 092

Danksagungen: 290 / 131

  • Nachricht senden

2

Sonntag, 6. Januar 2019, 22:40

Why not try pure2 in flash?
Then you will be able to check if the problems remain.

gorski

PurE2-Supporter

  • »gorski« ist männlich

Beiträge: 206

Aktivitätspunkte: 2 080

Registrierungsdatum: 12. August 2017

Level: 26 [?]

Erfahrungspunkte: 107 508

Nächstes Level: 125 609

Danksagungen: 108 / 71

  • Nachricht senden

3

Montag, 7. Januar 2019, 10:24

I'm with Franc. I have it in the flash and it is running great! Fabulous picture quality, streaming, playback, sat TV - all at a very high level!

It is doing more-or-less all I need it to do - so, what are your needs, please?

And precisely, what is not working?

We'll help you out... ;)
http://www.english.upenn.edu/~mgamer/Etexts/kant.html - I. Kant, "Political writings" (1784), the jolly text on Enlightenment, at the basis of Modernity...

lexlexus

Anfänger

  • »lexlexus« ist männlich
  • »lexlexus« ist der Autor dieses Themas

Beiträge: 10

Aktivitätspunkte: 70

Registrierungsdatum: 29. Dezember 2018

Level: 6 [?]

Erfahrungspunkte: 185

Nächstes Level: 282

Danksagungen: 2 / 1

  • Nachricht senden

4

Montag, 7. Januar 2019, 22:35

hello Franc and Gorski

First off all thnx for reply and the help that you are willing to give

i did try to run/install it in the flash but after 30 min i stopped it because its doing nothing

that's why i install it on multiboot

when its on multiboot it will install on the usb and it runs fine only i cant install any applications he is not finding anything

Do i have to completely remoe anything in the flash or must i go back to factory settings and than install pure2

gorski

PurE2-Supporter

  • »gorski« ist männlich

Beiträge: 206

Aktivitätspunkte: 2 080

Registrierungsdatum: 12. August 2017

Level: 26 [?]

Erfahrungspunkte: 107 508

Nächstes Level: 125 609

Danksagungen: 108 / 71

  • Nachricht senden

5

Dienstag, 8. Januar 2019, 01:40

This is the first...

How are you installing it? Try a different USB stick, download the image again, start from scratch...

Then, let's see... Good luck!

P.S. Everysooften I find it is good to reinstall the image, it becomes faster etc. But this behaviour I have never seen....
http://www.english.upenn.edu/~mgamer/Etexts/kant.html - I. Kant, "Political writings" (1784), the jolly text on Enlightenment, at the basis of Modernity...

lexlexus

Anfänger

  • »lexlexus« ist männlich
  • »lexlexus« ist der Autor dieses Themas

Beiträge: 10

Aktivitätspunkte: 70

Registrierungsdatum: 29. Dezember 2018

Level: 6 [?]

Erfahrungspunkte: 185

Nächstes Level: 282

Danksagungen: 2 / 1

  • Nachricht senden

6

Dienstag, 8. Januar 2019, 20:49

thnx for input

i installed it with usbstick
i will try some other usbsticks that i have and will install it from scratch

i will do that tomorrow evening
I will let you know the outcome for all of this

regards

gorski

PurE2-Supporter

  • »gorski« ist männlich

Beiträge: 206

Aktivitätspunkte: 2 080

Registrierungsdatum: 12. August 2017

Level: 26 [?]

Erfahrungspunkte: 107 508

Nächstes Level: 125 609

Danksagungen: 108 / 71

  • Nachricht senden

7

Mittwoch, 9. Januar 2019, 21:07

Here it is, just in case somebody needs it...





Good luck!
»gorski« hat folgende Datei angehängt:
http://www.english.upenn.edu/~mgamer/Etexts/kant.html - I. Kant, "Political writings" (1784), the jolly text on Enlightenment, at the basis of Modernity...

Es hat sich bereits 1 registrierter Benutzer bedankt.

Benutzer, die sich für diesen Beitrag bedankt haben:

lexlexus (09.01.2019)

lexlexus

Anfänger

  • »lexlexus« ist männlich
  • »lexlexus« ist der Autor dieses Themas

Beiträge: 10

Aktivitätspunkte: 70

Registrierungsdatum: 29. Dezember 2018

Level: 6 [?]

Erfahrungspunkte: 185

Nächstes Level: 282

Danksagungen: 2 / 1

  • Nachricht senden

8

Mittwoch, 9. Januar 2019, 23:31

Hello Gorski


I did my best to get pure2 in the flash of my et10000 but no luck sofar
i even downloaded your attached file to see if i do something wrong ( but no i do it just like that )

If i put the usb stick in and will power it up it sees my usb and ask if i want to flash i press oke than the usb is blinking that it is reading something and after a minute or so its the led keeps burning but isn't doing anything anymore

I tried 6 different usb stick from Samsung 4gb Kingston 2gb and 4gb Verbatim 2gb Scandisk 4gb and Corsair
When i typing this its already trying to flash for about 10 min whit no luck ( its just says Flashing in the display )

The first time i powered the box down and powered it back up on and its just booted back to the Vix images that was on /in the flash

Than i copied Vix , Pli and even OpenAtv on the same usb sticks and put them in and power up the Xtrend it flashing and after a few minutes its booting and ready to run the install wizard
What is wrong with my ET10K

I dont know it anymore
I will try to boot it tomorrow back to fabrics settings and try to get Pure2 than in the flash

regards
Lexlexus

gorski

PurE2-Supporter

  • »gorski« ist männlich

Beiträge: 206

Aktivitätspunkte: 2 080

Registrierungsdatum: 12. August 2017

Level: 26 [?]

Erfahrungspunkte: 107 508

Nächstes Level: 125 609

Danksagungen: 108 / 71

  • Nachricht senden

9

Donnerstag, 10. Januar 2019, 00:09

OK, m8, let's try this...

Thanx to Delfi, you have a bootloader to flash the same way, it seems...

Let's take it one step at the time - try this, possibly a newer or at least healthy bootloader and then come back and do tell...
»gorski« hat folgende Datei angehängt:
http://www.english.upenn.edu/~mgamer/Etexts/kant.html - I. Kant, "Political writings" (1784), the jolly text on Enlightenment, at the basis of Modernity...

lexlexus

Anfänger

  • »lexlexus« ist männlich
  • »lexlexus« ist der Autor dieses Themas

Beiträge: 10

Aktivitätspunkte: 70

Registrierungsdatum: 29. Dezember 2018

Level: 6 [?]

Erfahrungspunkte: 185

Nächstes Level: 282

Danksagungen: 2 / 1

  • Nachricht senden

10

Donnerstag, 10. Januar 2019, 21:17

Thnx Gorski and not to forget Delfi for this

Downloaded the file and will try it later on the evening ... fingers crossed

lexlexus

Anfänger

  • »lexlexus« ist männlich
  • »lexlexus« ist der Autor dieses Themas

Beiträge: 10

Aktivitätspunkte: 70

Registrierungsdatum: 29. Dezember 2018

Level: 6 [?]

Erfahrungspunkte: 185

Nächstes Level: 282

Danksagungen: 2 / 1

  • Nachricht senden

11

Freitag, 11. Januar 2019, 22:01

hello

I flash the newer / healthy boot-loader
than on usb stick Pure2 and tryed to flash it after ten minutes nothing happened
Than again flash boot-loader than again pure2 and guess what happened after about 5 min

Pure2 was on the tv screen

This was the trick
i'm really happy party25 :EV012E~133: $%&/ $%&/ $%&/

Everything is working the feeds etc

Only one problem found sofar if a channel in the bouquets / channel-list says N/A ( if a channel is gone / removed ) and you select it
than you get a blue screen and box is going to reboot / restarts

I will try to find this weekend a log where this problem is writhed down / stored at

regard
lex

Es hat sich bereits 1 registrierter Benutzer bedankt.

Benutzer, die sich für diesen Beitrag bedankt haben:

gorski (12.01.2019)

atari

Moderator

  • »atari« ist männlich

Beiträge: 140

Aktivitätspunkte: 1 685

Registrierungsdatum: 27. Oktober 2017

Level: 23 [?]

Erfahrungspunkte: 62 458

Nächstes Level: 62 494

Danksagungen: 98 / 86

  • Nachricht senden

12

Freitag, 11. Januar 2019, 22:31

is a stupid question

please make a channel search with yes put delete everything

restart u box and control

do you put backup settings back on fresh install ?

:: To minimize errors, clean installation and setting yourself again
best regards,



i like PurE2 much more


Es hat sich bereits 1 registrierter Benutzer bedankt.

Benutzer, die sich für diesen Beitrag bedankt haben:

gorski (12.01.2019)

lexlexus

Anfänger

  • »lexlexus« ist männlich
  • »lexlexus« ist der Autor dieses Themas

Beiträge: 10

Aktivitätspunkte: 70

Registrierungsdatum: 29. Dezember 2018

Level: 6 [?]

Erfahrungspunkte: 185

Nächstes Level: 282

Danksagungen: 2 / 1

  • Nachricht senden

13

Samstag, 12. Januar 2019, 00:34

Hello Atari

Nope did everything from scratch just as gorski proposed
i let the search do 1 satellite at a time and in some bouquets/ channel-list there are a few N/A
while i was zapping with the buttons channel up /down this happened that he was getting this error after a while i found out that this was happened bij the N/A channel when selected

and there is another error i just found while installing/setting up my tuner to use them at full
... when i select the satellites and was getting to the 28.5 satellite it stops at 25.5e Es'hall-1 and wont get
any verderer you have to go back all the way and go to the 28.2 e in reverse
if you go from the 28.2 down to 23.5 and than back to 28.2 it will not go back


regards

gorski

PurE2-Supporter

  • »gorski« ist männlich

Beiträge: 206

Aktivitätspunkte: 2 080

Registrierungsdatum: 12. August 2017

Level: 26 [?]

Erfahrungspunkte: 107 508

Nächstes Level: 125 609

Danksagungen: 108 / 71

  • Nachricht senden

14

Samstag, 12. Januar 2019, 01:41

Good on you, m8! I'm happy for ya!

If I get N/A for a channel in the list - (usually) it's because I didn't get the tuner properly configured or the signal is too weak/none whatsoever. Check your settings from scratch and check the footprint of the TP you are searching channels under.

However, even if I get N/A I did not get a BSOD (which I find odd)...

Logs are by default in /home/root/logs folder.

Tell us about your setup - in detail and maybe...

Good luck!

P.S. Try this list and see if that helps. But you will need to scan each position, for sure...
»gorski« hat folgende Datei angehängt:
http://www.english.upenn.edu/~mgamer/Etexts/kant.html - I. Kant, "Political writings" (1784), the jolly text on Enlightenment, at the basis of Modernity...

lexlexus

Anfänger

  • »lexlexus« ist männlich
  • »lexlexus« ist der Autor dieses Themas

Beiträge: 10

Aktivitätspunkte: 70

Registrierungsdatum: 29. Dezember 2018

Level: 6 [?]

Erfahrungspunkte: 185

Nächstes Level: 282

Danksagungen: 2 / 1

  • Nachricht senden

15

Samstag, 12. Januar 2019, 21:40

Hello Gorski

I have a T55 and a 1.20 dish for the 23.5 twin lnb
On the t55 i have 0.8w 1.0 w 4.8e 9e 10e 13e 19e 23.5e 28.2e and when a satellite is in range i have him added to lnb
just like 0.6 0.8 and 1.0 on same lnb (same lnb other input )

All on a diseqswitch with twin lnb's

I have a log file of the crash sould i post it here as a file or should i send it as pm
or is it not necessary

regards

gorski

PurE2-Supporter

  • »gorski« ist männlich

Beiträge: 206

Aktivitätspunkte: 2 080

Registrierungsdatum: 12. August 2017

Level: 26 [?]

Erfahrungspunkte: 107 508

Nächstes Level: 125 609

Danksagungen: 108 / 71

  • Nachricht senden

16

Sonntag, 13. Januar 2019, 01:32

Don't ask, just do it, m8... ;)

You may have messed up some settings, if you have loadsa LNBs, like I do. Occasionally, doing all of those - one makes an error...

You know that up to 1,5 degree on each side T90 can get on a single LNB? I have T90 and 11 LNBs on it (39E - 5W), plus, like you, single dish for another satellite position (30W).



Not sure for T55 but I would guess that you do not need - just like me - separate LNBs for 10 & 9 E, or 4 & 5W. Like you, I have a single one on those positions and I have it all - but with the same settings for both positions. So, 10 and 9E are absolutely the same in settings. One has 2 sat positions and both are on the same LNB. Here is an example of my settings:



No signal, as I said, gives N/A, esp. if you have some settings not done properly...

Give us some photos and screenshots, so we can see...

Good luck!
http://www.english.upenn.edu/~mgamer/Etexts/kant.html - I. Kant, "Political writings" (1784), the jolly text on Enlightenment, at the basis of Modernity...

lexlexus

Anfänger

  • »lexlexus« ist männlich
  • »lexlexus« ist der Autor dieses Themas

Beiträge: 10

Aktivitätspunkte: 70

Registrierungsdatum: 29. Dezember 2018

Level: 6 [?]

Erfahrungspunkte: 185

Nächstes Level: 282

Danksagungen: 2 / 1

  • Nachricht senden

17

Sonntag, 13. Januar 2019, 22:41

hello

yes i know that it is 1.5 degrees in range of same satellite

Here is some of my lnb config

0.8w lnb 1 input 1
1.0w lnb 2 input 1

9.0e lnb 9 input 9
10.0e lnb 10 input 9

or is it usual to set it up like this
0.8w lnb 1 input 1
1.0w lnb 1 input 1

9.0 lnb 9 input 9
10.0 lnb 9 input 9

i will to try make some photos from my satellite-dish and post them here
also some screenshots from my ET-10k

i also attach some files

regards
»lexlexus« hat folgende Dateien angehängt:

gorski

PurE2-Supporter

  • »gorski« ist männlich

Beiträge: 206

Aktivitätspunkte: 2 080

Registrierungsdatum: 12. August 2017

Level: 26 [?]

Erfahrungspunkte: 107 508

Nächstes Level: 125 609

Danksagungen: 108 / 71

  • Nachricht senden

18

Montag, 14. Januar 2019, 03:25

I do it as B option, as I said, since they are both on the same LNB, so it has to be the same LNB - in fact, everything is the same...





Btw, I have 4 x EMP Centauri 17in1 switches and 12 QUAD LNBs...
http://www.english.upenn.edu/~mgamer/Etexts/kant.html - I. Kant, "Political writings" (1784), the jolly text on Enlightenment, at the basis of Modernity...

gorski

PurE2-Supporter

  • »gorski« ist männlich

Beiträge: 206

Aktivitätspunkte: 2 080

Registrierungsdatum: 12. August 2017

Level: 26 [?]

Erfahrungspunkte: 107 508

Nächstes Level: 125 609

Danksagungen: 108 / 71

  • Nachricht senden

19

Montag, 14. Januar 2019, 04:05

Ha, I am not a coder and I do not understand in depth what I am seeing in your logs but I did tell you that you will get N/A if there is no signal (so, I still think I see switch and LNB/signal issues [you have more LNBs in settings than the number of actual LNBs]) - see the first and last line in this log excerpt:

Source code

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
17:19:11.8508 [   ] dvb/frontend.cpp:2360 tuneLoopInt [SEC] invalidate current switch params
17:19:11.8516 [   ] dvb/frontend.cpp:2022 tuneLoopInt [eDVBFrontend] [SEC] tuner 1 setVoltage 1
17:19:11.8525 [   ] dvb/frontend.cpp:2013 tuneLoopInt [eDVBFrontend] [SEC] tuner 1 sleep 10ms
17:19:11.8627 [   ] dvb/frontend.cpp:2059 tuneLoopInt [SEC] tuner 1 setTone 1
17:19:11.8639 [   ] dvb/frontend.cpp:2013 tuneLoopInt [eDVBFrontend] [SEC] tuner 1 sleep 10ms
17:19:11.8740 [   ] dvb/frontend.cpp:2370 tuneLoopInt [SEC] update current switch params
17:19:11.8743 [   ] dvb/frontend.cpp:2124 tuneLoopInt [SEC] tuner 1 startTuneTimeout 5000
17:19:11.8744 [   ] dvb/frontend.cpp:2117 tuneLoopInt [SEC] tuner 1 setFrontend: events enabled
17:19:11.8745 [   ] dvb/frontend.cpp:2597 setFrontend setting frontend 1 events: on
17:19:11.8836 [   ] dvb/frontend.cpp:1076 feEvent [eDVBFrontend] (1)fe event: status 0, inversion off, m_tuning 1
17:19:11.8837 [   ] dvb/frontend.cpp:2013 tuneLoopInt [eDVBFrontend] [SEC] tuner 1 sleep 500ms
17:19:11.9961 [   ] dvb/frontend.cpp:1076 feEvent [eDVBFrontend] (1)fe event: status 1f, inversion off, m_tuning 2
17:19:11.9962 [   ] dvb/dvb.cpp:1891 frontendStateChanged [eDVBChannel] OURSTATE: tuner 1 ok
17:19:11.9963 [   ] dvb/dvbtime.cpp:675 DVBChannelStateChanged [eDVBLocalTimerHandler] channel 0x187c9d0 running
17:19:11.9964 [   ] dvb/dvb.cpp:2423 getDemux [eDVBChannel] getDemux cap=00
17:19:11.9969 [   ] dvb/epgcache.cpp:684 DVBChannelStateChanged [eEPGCache] channel 0x187c9d0 running
17:19:11.9970 [   ] dvb/dvb.cpp:2423 getDemux [eDVBChannel] getDemux cap=00
17:19:11.9976 [   ] dvb/dvb.cpp:1493 DVBChannelStateChanged [eDVBResourceManager] stop release channel timer
17:19:11.9977 [   ] dvb/dvb.cpp:2423 getDemux [eDVBChannel] getDemux cap=01
17:19:11.9977 [   ] dvb/dvb.cpp:1107 allocateDemux [eDVBResourceManager] allocate demux cap=01
17:19:11.9978 [   ] dvb/dvb.cpp:1216 allocateDemux [eDVBResourceManager] allocating shared demux adapter=0, demux=0, source=1
17:19:11.9978 [   ] dvb/pmt.cpp:77 channelStateChanged [eDVBServicePMTHandler] ok ... now we start!!
17:19:11.9992 [   ] dvb/epgcache.cpp:2075 startChannel [eEPGCache] next update in 2 sec
17:19:12.0729 [   ] bsod.cpp:379 oops PC: 005c31b8
17:19:12.0730 [   ] bsod.cpp:385 oops 00000000 00000001 00000000 006f100c
17:19:12.0730 [   ] bsod.cpp:385 oops 01017c54 006f1009 0187c268 018d1308
17:19:12.0731 [   ] bsod.cpp:385 oops 0000162c 00000042 0000002c 00000009
17:19:12.0731 [   ] bsod.cpp:385 oops 00000020 00000000 00000020 006d0000
17:19:12.0732 [   ] bsod.cpp:385 oops 01879728 018da868 0185d238 0187ecf8
17:19:12.0732 [   ] bsod.cpp:385 oops 7fea1b68 0187ed00 00600000 00600000
17:19:12.0733 [   ] bsod.cpp:385 oops 006d7a8c 005b42a8 77630c28 00000000
17:19:12.0733 [   ] bsod.cpp:385 oops 76fd7e10 7fea1ad0 7fea1de8 005c31b4
17:19:12.0738 [   ] bsod.cpp:402 print_backtrace Backtrace:
17:19:12.0741 [   ] bsod.cpp:410 print_backtrace /usr/bin/enigma2(_Z17handleFatalSignaliP9siginfo_tPv) [0x46E94C]
17:19:12.0742 [   ] bsod.cpp:410 print_backtrace linux-vdso.so.1(n/a) [0x77EBE560]
17:19:12.0745 [   ] bsod.cpp:410 print_backtrace /usr/bin/enigma2(_ZN15eDVBServicePlay12serviceEventEi) [0x5C31BA]
17:19:12.0748 [   ] bsod.cpp:410 print_backtrace /usr/bin/enigma2(n/a) [0x4B05F0]
17:19:12.0751 [   ] bsod.cpp:410 print_backtrace /usr/bin/enigma2(_ZN21eDVBServicePMTHandler19channelStateChangedEP11iDVBChannel) [0x4E8770]
17:19:12.0764 [   ] bsod.cpp:410 print_backtrace /usr/bin/enigma2(n/a) [0x4ABF30]
17:19:12.0767 [   ] bsod.cpp:410 print_backtrace /usr/bin/enigma2(_ZN11eDVBChannel20frontendStateChangedEP12iDVBFrontend) [0x4A7AB4]
17:19:12.0770 [   ] bsod.cpp:410 print_backtrace /usr/bin/enigma2(n/a) [0x4E465C]
17:19:12.0774 [   ] bsod.cpp:410 print_backtrace /usr/bin/enigma2(_ZN12eDVBFrontend7feEventEi) [0x4DE5D8]
17:19:12.0777 [   ] bsod.cpp:410 print_backtrace /usr/bin/enigma2(n/a) [0x473CE8]
17:19:12.0780 [   ] bsod.cpp:410 print_backtrace /usr/bin/enigma2(_ZN9eMainloop15processOneEventElPP7_object9ePyObject) [0x476134]
17:19:12.0783 [   ] bsod.cpp:410 print_backtrace /usr/bin/enigma2(_ZN9eMainloop7iterateEjPP7_object9ePyObject) [0x47644C]
17:19:12.0786 [   ] bsod.cpp:410 print_backtrace /usr/bin/enigma2(_ZN9eMainloop4pollE9ePyObjectS0_) [0x47653C]
17:19:12.0789 [   ] bsod.cpp:410 print_backtrace /usr/bin/enigma2(n/a) [0x566F58]
17:19:12.0790 [   ] bsod.cpp:422 handleFatalSignal -------FATAL SIGNAL


...and...

Source code

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
17:13:20.7209 [   ] dvb/sec.cpp:72 canTune [eDVBSatelliteEquipmentControl] direct_connected 1
17:13:20.7210 [   ] dvb/sec.cpp:111 canTune [eDVBSatelliteEquipmentControl] canTune 1
17:13:20.7211 [   ] dvb/sec.cpp:126 canTune [eDVBSatelliteEquipmentControl] lnb 0 found
17:13:20.7211 [   ] dvb/sec.cpp:136 canTune [eDVBSatelliteEquipmentControl] 0 option(s) at position 235
17:13:20.7212 [   ] dvb/sec.cpp:126 canTune [eDVBSatelliteEquipmentControl] lnb 1 found
17:13:20.7212 [   ] dvb/sec.cpp:136 canTune [eDVBSatelliteEquipmentControl] 0 option(s) at position 235
17:13:20.7213 [   ] dvb/sec.cpp:126 canTune [eDVBSatelliteEquipmentControl] lnb 2 found
17:13:20.7213 [   ] dvb/sec.cpp:136 canTune [eDVBSatelliteEquipmentControl] 0 option(s) at position 235
17:13:20.7214 [   ] dvb/sec.cpp:126 canTune [eDVBSatelliteEquipmentControl] lnb 3 found
17:13:20.7214 [   ] dvb/sec.cpp:136 canTune [eDVBSatelliteEquipmentControl] 1 option(s) at position 235
17:13:20.7215 [   ] dvb/sec.cpp:150 canTune [eDVBSatelliteEquipmentControl] sat 235 found
17:13:20.7215 [   ] dvb/sec.cpp:194 canTune ret1 10000
17:13:20.7216 [   ] dvb/sec.cpp:240 canTune [eDVBSatelliteEquipmentControl] ret5 10000
17:13:20.7216 [   ] dvb/sec.cpp:257 canTune [eDVBSatelliteEquipmentControl] ret 10000, score old 0
17:13:20.7217 [   ] dvb/sec.cpp:264 canTune [eDVBSatelliteEquipmentControl] score new 10000
17:13:20.7217 [   ] dvb/sec.cpp:126 canTune [eDVBSatelliteEquipmentControl] lnb 4 found
17:13:20.7218 [   ] dvb/sec.cpp:136 canTune [eDVBSatelliteEquipmentControl] 0 option(s) at position 235
17:13:20.7219 [   ] dvb/sec.cpp:126 canTune [eDVBSatelliteEquipmentControl] lnb 5 found
17:13:20.7219 [   ] dvb/sec.cpp:136 canTune [eDVBSatelliteEquipmentControl] 0 option(s) at position 235
17:13:20.7220 [   ] dvb/sec.cpp:126 canTune [eDVBSatelliteEquipmentControl] lnb 6 found
17:13:20.7223 [   ] dvb/sec.cpp:136 canTune [eDVBSatelliteEquipmentControl] 0 option(s) at position 235
17:13:20.7224 [   ] dvb/sec.cpp:126 canTune [eDVBSatelliteEquipmentControl] lnb 7 found
17:13:20.7224 [   ] dvb/sec.cpp:136 canTune [eDVBSatelliteEquipmentControl] 0 option(s) at position 235
17:13:20.7225 [   ] dvb/sec.cpp:126 canTune [eDVBSatelliteEquipmentControl] lnb 8 found
17:13:20.7225 [   ] dvb/sec.cpp:136 canTune [eDVBSatelliteEquipmentControl] 0 option(s) at position 235
17:13:20.7226 [   ] dvb/sec.cpp:126 canTune [eDVBSatelliteEquipmentControl] lnb 9 found
17:13:20.7226 [   ] dvb/sec.cpp:136 canTune [eDVBSatelliteEquipmentControl] 0 option(s) at position 235
17:13:20.7227 [   ] dvb/sec.cpp:126 canTune [eDVBSatelliteEquipmentControl] lnb 10 found
17:13:20.7228 [   ] dvb/sec.cpp:136 canTune [eDVBSatelliteEquipmentControl] 0 option(s) at position 235
17:13:20.7229 [   ] dvb/sec.cpp:279 canTune [eDVBSatelliteEquipmentControl] final score 9995
17:13:20.7230 [   ] dvb/sec.cpp:72 canTune [eDVBSatelliteEquipmentControl] direct_connected 1
17:13:20.7231 [   ] dvb/sec.cpp:111 canTune [eDVBSatelliteEquipmentControl] canTune 2
17:13:20.7231 [   ] dvb/sec.cpp:126 canTune [eDVBSatelliteEquipmentControl] lnb 11 found
17:13:20.7232 [   ] dvb/sec.cpp:136 canTune [eDVBSatelliteEquipmentControl] 1 option(s) at position 235
17:13:20.7232 [   ] dvb/sec.cpp:150 canTune [eDVBSatelliteEquipmentControl] sat 235 found
17:13:20.7233 [   ] dvb/sec.cpp:194 canTune ret1 15000
17:13:20.7233 [   ] dvb/sec.cpp:240 canTune [eDVBSatelliteEquipmentControl] ret5 15000
17:13:20.7234 [   ] dvb/sec.cpp:257 canTune [eDVBSatelliteEquipmentControl] ret 15000, score old 0
17:13:20.7234 [   ] dvb/sec.cpp:264 canTune [eDVBSatelliteEquipmentControl] score new 15000
17:13:20.7235 [   ] dvb/sec.cpp:279 canTune [eDVBSatelliteEquipmentControl] final score 15005


If my "feeling" for all this is correct, then the switch itself (HW) has to be (physically set to be) in DiSEqC mode 1.1.

And in E2 Settings try the same settings as mine (see screenshots of mine above for details)...

Btw, second tuner is set to "the same as Tuner 1".

Hopefully, it'll work...
http://www.english.upenn.edu/~mgamer/Etexts/kant.html - I. Kant, "Political writings" (1784), the jolly text on Enlightenment, at the basis of Modernity...

lexlexus

Anfänger

  • »lexlexus« ist männlich
  • »lexlexus« ist der Autor dieses Themas

Beiträge: 10

Aktivitätspunkte: 70

Registrierungsdatum: 29. Dezember 2018

Level: 6 [?]

Erfahrungspunkte: 185

Nächstes Level: 282

Danksagungen: 2 / 1

  • Nachricht senden

20

Montag, 14. Januar 2019, 22:13

Thnx for all your words and options to try for me

I will set the settings like in option B and than do a reboot
my switch is standing in mode 1.1 it is a Multiprotocol DiSEqC Switch Best 10/1
tuner B s for my other satellite-dish that is only on 23.5 so its set as single

Other 2 tuners are for cable

hope this does the trick also over here...and if its not working i let you know it also

only i wil not reply tomorrow and a few days later I'll be back on friday because tomorrow colleges and i have to go to dusseldorf there is a boat show next week ...we have to deliver a few boats for the show

regards

Es hat sich bereits 1 registrierter Benutzer bedankt.

Benutzer, die sich für diesen Beitrag bedankt haben:

terrajoe (15.01.2019)

Zurzeit ist neben Ihnen 1 Benutzer in diesem Thema unterwegs:

1 Mitglied

lexlexus

Legende: Administratoren, Super Moderatoren, Pur-E2-Teamleiter, Moderatoren, S-Vip , Pur-E2-Supporter, Lost Teammember, Vip, Sponsor

Ähnliche Themen